Ricoh Network Data Protection Unit Type C - Manual (Page 44)

G1398501_1.00 Copyright © 2005 44
Installing Options
Available Options
This section describes how to install options.
By installing options, you can improve the printer performance and have an ex-
panded variety of features to use. For the specifications of each option, see
Maintenance Guide.
❒ The voltage rating of the connector for options is 24 V DC or less.
Option List
The following is a list of options for this printer. Some printer models come with
the expansion AD440 (duplex unit) contained as default.
: Available option
: Standard equipment
• Before installing options, the machine should be turned off and unplugged
for at least an hour. Components inside the machine become very hot, and
can cause a burn if touched.
• Before moving the machine, unplug the power cable from the outlet. If the
cable is unplugged abruptly, it could become damaged. Damaged plugs or
cables can cause an electrical or fire hazard.
• When lifting the machine, use the grips on both sides. The machine could
break or cause an injury if dropped.
Basic model printer Duplex unit standard
model printer
Paper Feed Unit Type 3000
AD440
Printer Hard Disk Type 3000
Memory Unit Type D 128MB
Memory Unit Type E 256MB
IEEE 802.11b Interface Unit Type H
IEEE 1284 Interface Board Type A
IEEE 1394 Interface Board Type B
Bluetooth Interface Unit Type 3245
User Account Enhance Unit Type E
Network Data Protection Unit Type C