Ricoh Network Data Protection Unit Type C - Manual (Page 38)

Setting Up
38
Selecting the Display Language
Select a language using the procedure described here.
The message for the selected language will appear on the display. If you want to
use the display in English, the following procedures are unnecessary.
❒ The default setting is English.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Language].
C
Press the {# Enter} key.
The following message appears on the display:
D
Press the {U} or {T} key until the language you want to select appears.
Menu:
Language
Language:
*English