Ricoh Network Data Protection Unit Type C - Manual (Page 108)

Installing the Printer Driver
108
Install the Operating Instructions
The CD-ROM provided with the printer contains an HTML Operating Instructions
Manual in HTML version. Follow the above instructions to install it.
❒ System Requirements :
• Windows 95/98/Me, Windows 2000/XP, Windows Server 2003 or Windows
NT4.0.
• 800 x 600 or higher monitor resolution.
❒ Web Browsers :
• Microsoft Internet Explorer 4.01 SP2 or later.
• Netscape 6.2 or later.
❒ If you are using Internet Explorer 3.02 or earlier, or Netscape Navigator 4.05
or earlier as your Web browser, a simpler version of the Operating Instructions
Manual is displayed.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work under certain operating system setting. If this is the
case, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
D
Click [Install manuals].
E
Follow the instructions on the screen to complete the installation.
F
Click [Finish] when the installation is completed.
G
Click [Exit].
❒ Auto Run may not work under certain operating system setting. If this is the
case, copy all datas on the CD-ROM root directory to your hard disk drive,
and then launch “Setup.exe” to start the installation.
❒ To uninstall the Operating Instructions Manual, select [Programs] in the
[Start] menu, select your printer driver, and then click [uninstall]. You can
uninstall each Manual Guide separately.
❒ If you are using an incompatible Web browser and the simpler version of
the Operating Instructions Manual does not correctly display correctly,
open folder “MANUAL\R_MANUAL\ (language) \ (SETUP or MAINTE or
SOFTWARE) \unv\” on the CD-ROM. Double-click on “index.htm”.