Contrast, Color saturation, 6. typical gray bar pattern for adjusting contrast – Runco Reflection User Manual

Page 46

Runco CL-410 and CL-420 Owner’s Operating Manual

Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the
one shown in Figure 4-6.

Figure 4-6. Typical Gray Bar Pattern for Adjusting Contrast

Select Contrast from the Picture Adjust menu. Using the left- and right-arrow (

)

buttons, adjust the contrast to a point just below which the white rectangle starts to
increase in size.

Color Saturation: On your external test pattern source, select a color bar pattern like the
one shown in Figure 4-7.

Figure 4-7. Typical Color Bar Pattern for Adjusting Color Saturation and Tint

Brightness and contrast controls are interactive. A change to one
may require a subtle change to the other in order to achieve the
optimum setting.

Note

gray

yellow

cyan

een

magenta

blue