beautypg.com

Notes on remote control operation, Figure 3-1 . available range of the remote control, 1. available range of the remote control – Runco Reflection User Manual

Page 22

background image

Installation

12

Runco CL-410 and CL-420 Owner’s Operating Manual

Notes on Remote Control

Operation

The remote control can be used to control the projector within the ranges shown in Figure
3-1.

Figure 3-1. Available Range of the Remote Control

• For best results, hold the remote control within 23 feet (7m) of the back or top sensor

and aligned within 30°.

• Do not drop the remote control or expose it to moisture or high temperature.

• The remote control may malfunction under a fluorescent lamp. If that occurs, move the

projector away from the fluorescent lamp.

• Make sure that there is nothing obstructing the infrared beam between the remote

control and the IR receiver on the projector.

• If the effective range of the remote control decreases, or it stops working, replace the

batteries with new ones.

• Ambient conditions may possibly impede the operation of the remote control. If this

happens, point the remote control at the projector, and repeat the operation.

The signal from the remote control can be reflected by the screen
or other surfaces.

Note