Main menu, Source select, Aspect ratio – Runco Reflection User Manual
Page 42
32
Runco CL-410 and CL-420 Owner’s Operating Manual
Main Menu
The Main Menu is the starting point for accessing all projector functions.
(The ISF Settings menu is grayed out and not accessible until you enter a passcode.)
Source Select
From the Main Menu, select Source select to choose a video signal source.
The active source is indicated by an arrow (
→
) to its left; in the example at left, Video is the
active source.
Aspect Ratio
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of
program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by an arrow (
→
) to its left; in the example
at left, Anamorphic is selected.
Runco CL-420
Picture Adjust
Source Select
Aspect Ratio
Image Option
Installation
ISF Settings
➤
Source select
→
Video
S-Video
Component 1
Component 2
RGB-HD
HDMI/DVI
➤
Aspect Ratio
→
Anamorphic (16/9)
Standard (4/3)
LetterBox
VirtualWide
Cinema
Virtual Cinema
➤
When you change the aspect ratio, save the change to a preset
afterwards. Otherwise, the change will be lost when a different
input is selected. (The aspect ratio is saved for each input and
resolution separately.) For information about saving settings, refer
to
Note