Information, Signal / system, Network – Runco SIGNATURE CINEMA SC-50D User Manual
Page 80: Field service / manufacturing, Pre l iminar y
64
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
PRE
IMINAR
Y
Signal / System: Select Information from the Main Menu, then choose either Signal or
System to display information about the current input signal (resolution, frequency, type et
cetera) and installed firmware versions, as well as other information that uniquely identifies
your DHD Controller and display device.
Should you ever need to contact Runco Technical Support, this information will help them
answer your questions or resolve product performance issues.
Network: Select Information from the Main Menu, then choose Network to display
information about the Ethernet network connection.
To enable network communication via Ethernet, refer to IP Configuration on page 71.
Field Service / Manufacturing: The Field Service and Manufacturing menus are
password-protected and intended for use only by Runco service personnel and factory
technicians.
➤
HDMI 1
Signal Format
1080p/60
Input Resolution
1920x1080
Vertical Freq
59.94 Hz
Horizontal Freq
67.500 kHz
Pixel Clock
148.500 MHz
Color Space
REC709
Sync Type
Separate
Memory Preset
ISF Night
Model
DHD4
Display Name
SC-50d/SC-60
d
Output Resolution
1920x1080
Serial Number
00000000
Boot Version
4.0
Firmware Version
4.0
Micro Version
4.0
MAC Address
1A:2B:3C:4D:5E:6F
IP Address
192.168.0.150
Subnet Mask
255.255.0.0
Default Gateway 192.168.1.1
DHCP
Enabled
Network Status Connected