Runco SIGNATURE CINEMA SC-50D - Manual (Page 113)

Specifications
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual 97
PRE
L
IMINAR
Y
7.1
SC-50d/SC-60d
Projector
Specifications Table 7-1 lists the SC-50d/SC-60d projector specifications.
7. Specifications
Table 7-1. SC-50d/SC-60d Projector Specifications
Projector Type: Texas Instruments Digital Light Processing™ (DLP) dual
imaging system, SuperOnyx™ DMD™
Native Resolution: Full HD 1920 x 1080 (1080p)
Lamp Life: SC-50d - 2,000 hours typical
SC-60d - 1,300 hours typical
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native
DTV Compatibility: Refer to Table 7-2
Picture Size (16:9 Screen),
SC-50d: Recommended Width: 100 - 132 in.
Maximum Width: 264 in.
Picture Size (16:9 Screen),
SC-50d: Recommended Width: 120 - 198 in.
Maximum Width: 420 in.
Processing: Runco DHD4 Processor with ViVix IV™ technology and BRiC
(Backup, Recovery and Clone) tool
Control Options: • Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via
HDMI
• Ethernet
Inputs: Refer to Table 7-2
Video Standards: NTSC, PAL, SECAM, CEA-861D
Calibration: ISF Certified Calibration Configuration
Throw Distance
(Factor x Screen Width): Refer to Table 3-3
Horizontal & Vertical Offset: Refer to Table 3-4
Light Output: SC-50d:
CSMS Specifications* – Private Cinema Calibration:
3,471 ANSI Lumens; 126 Foot-Lamberts (fL)
Uncalibrated: 6,000 ANSI Lumens
SC-60d:
CSMS Specifications* – Private Cinema Calibration:
5,785 ANSI Lumens; 210 Foot-Lamberts (fL)
Uncalibrated: 10,000 ANSI Lumens
*Measured on a 1.0 gain, 84" wide 16:9 screen
Contrast Ratio: CSMS* Contrast Ratio: >500:1 (ANSI)