Radio Shack TAD-1010 - Manual (Page 32)

32
TROUBLESHOOTING
We do not expect you to have any problems with your TAD-1010, but if you do, try
these suggestions. If you still have problems, take your TAD-1010 to your local
Radio Shack store for assistance.
Problem Suggestion
Noise, static, or weak sig-
nal when the phone is
away from the base.
Move closer to the base or relocate the base.
Noise, static, or weak sig-
nal even when the phone
is near the base. Place the handset in the base momentarily to
set the security access protection code and
reset the channel.
The TAD does not answer
calls.
Check all phone line connections.
Make sure the AC adapter is properly con-
nected to the base.
The TAD does not record
callers’ messages.
Check the memory available and erase mes-
sages as required.
The TAD is set to Announcement 2 or OGM.
Set the TAD to Announcement 1.
The handset does not ring
when you receive a call.
Make sure the handset ringer is turned on.
Check all phone line connections.
Make sure the AC adapter is properly con-
nected to the base.
Unplug some of the other phones on the tele-
phone line.
Your caller’s voice fades in
and out.
Move closer to the base or relocate the base.
43-771.fm Page 32 Friday, August 13, 1999 2:59 PM