Radio Shack TAD-1010 - Manual (Page 26)

26
SETTING THE TAD TO
ANSWER CALLS
To turn the TAD on and set it to answer
calls, press
ON/OFF . The ON/OFF indi-
cator lights when the TAD is on.
Notes:
• If flashes while the AC adapter
is properly connected, replace the
backup battery.
• Many local phone companies use
calling party control (CPC) to signal
that the caller has hung up. If your
TAD recognizes a CPC signal, it
releases the line. If you have Call
Waiting service, your TAD might
mistake the tone for a CPC signal
and release the line.
If the TAD records phone company
messages or dial tones, your local
phone company probably does not
use CPC.
To turn off the TAD, press ON/OFF .
Note: The cordless phone still operates
when the TAD is off.
REPEAT STOP PLAY SKIP
ON/OFF
MEMO
ANNC.
MEMORY
SETUP
VOLUME
MAIL BOX MULTI FUNCTION DISPLAY
ERASE
1
MEMO MESG'S
ANNC.
MAILBOX
1 SUN
+
OGM PM
MULTI-USER
DIGITAL ANSWERING SYSTEM
RECORDING A MEMO
Follow these steps to record a memo
up to 5 minutes long.
1. If multiple mailboxes are set up,
press MAILBOX to select the mail-
box where you want to record the
memo. If no specific mailbox is
selected, the memo is recorded in
the generic mailbox.
2. Press and hold MEMO for 2 sec-
onds. The TAD says “Recording
Memo” and beeps,
flashes, and
the clock displays 0:00 and
begins counting.
3. Speak into the TAD from about 12
inches away.
4. When you finish speaking, press
MEMO or STOP .
REC
REPEAT STOP PLAY SKIP
ON/OFF
MEMO
ANNC.
MEMORY
SETUP
VOLUME
MAIL BOX MULTI FUNCTION DISPLAY
ERASE
1
MEMO REC
ANNC.
MAILBOX
1
MULTI-USER
DIGITAL ANSWERING SYSTEM
43-771.fm Page 26 Friday, August 13, 1999 2:59 PM