Radio Shack TAD-1010 - Manual (Page 30)

30
Note: If you enter the correct remote
operation security code, but the TAD
does not accept it, the code might have
reset to the default (99) because of a
power failure. Try entering
99 as the re-
mote operation security code. If this
works, replace the TAD’s backup bat-
tery and reset the remote operation se-
curity code (see “Setting the Day and
Time” on Page 23 and “Setting the Re-
mote Operation Security Code” on
Page 22).
USING REMOTE
COMMANDS
Follow these steps to operate the TAD
from the cordless handset or a remote
touch-tone phone.
1. After you access the TAD by
remote, the TAD announces either
“X new message(s)” or “No new
messages,” indicating the total
number of new messages stored in
all mailboxes.
Note: The TAD announces “Mem-
ory full” if there is no more space for
messages, and “Low battery” if the
back-up battery power is low.
The TAD then announces “Press
one to play messages. Press six to
select mailbox. Press star for other
functions.”
Notes:
• If you want to hang up the phone
in the middle of playing mes-
sages, press
4 to stop message
playback before you hang up. If
you don’t stop message play-
back, the TAD continues to play
messages and tie up your phone
line.
• If you do not press a button
within 20 seconds, the TAD
hangs up.
2. Enter your selection.
3. When your selected option is com-
pleted, the TAD repeats the list of
remote commands. Enter a new
command or hang up the phone.
43-771.fm Page 30 Friday, August 13, 1999 2:59 PM