Radio Shack TAD-1010 - Manual (Page 24)

24
SELECTING AN
ANNOUNCEMENT
The TAD has three announcement op-
tions: 1, 2, and OGM.
• Announcement 1 lets you record a
personal announcement, and the
caller is able to leave a message up
to 5 minutes long.
If you decide not to record your own
message, Announcement 1 plays a
pre-recorded message that says
“Please record message after the
tone.”
• Announcement 2 lets you record a
personal announcement, but the
caller is unable to leave a message.
If you decide not to record your own
message, Announcement 2 plays
the pre-programmed outgoing mes-
sage.
• OGM (Outgoing Message) is pre-
programmed, and the caller is not
able to leave a message.
The OGM announcement says “No
one can answer the phone at the
moment. Please call again.”
Note: If Announcement 1 is
selected and the memory is full, the
TAD plays the pre-programmed
OGM.
To select which announcement plays
when the TAD answers calls, press
ANNC . The display changes from 1 to
2 to OGM .
Recording an Announcement
You can record a personal message for
the caller to hear when the TAD an-
swers a call.
Important Hints:
• The outgoing message must be at
least 2 seconds long for proper
remote operation.
• Your recorded announcements can
be up to 2 minutes long, but more
than 5 seconds of silence automat-
ically stops recording.
• We recommend you write down
your announcement before record-
ing it. If you plan to record callers’
messages, ask for the caller’s
name, phone number, and mes-
sage.
REPEAT STOP PLAY SKIP
ON/OFF
MEMO
ANNC.
MEMORY
SETUP
VOLUME
MAIL BOX MULTI FUNCTION DISPLAY
ERASE
MULTI-USER
DIGITAL ANSWERING SYSTEM
1
ANNC.
MAILBOX
1 SUN
PM
43-771.fm Page 24 Friday, August 13, 1999 2:59 PM