Radio Shack TAD-1010 - Manual (Page 10)

10
To prepare the bracket for mounting,
twist off the tabs attached to the center
of the bracket and press them securely
into the holes on the narrow end of the
bracket.
Mounting on a Wall Plate
1. Plug one end of the supplied 7-inch
modular cord into the TO TEL. LINE
jack.
2. Insert the tabs on the supplied
mounting bracket into the slots on
the base’s bottom. Then press the
bracket down until it snaps into
place.
3. Press the AC cord into the top and
bottom grooves on the left side of
the bracket. Press the modular cord
TO TEL. LINE
into the center groove on the right
side of the bracket, then plug the
modular cord into the modular
phone jack.
4. Line up the keyhole slots on the
bracket with the studs on the wall
plate, then slide the base down
onto the wall plate until it is secure.
5. Press up on the handset holder to
remove it, turn it over so its tabbed
edge faces up, then press it back
down into its slot on the base.
6. Plug the TAD-1010’s AC cord into
a standard AC outlet.
900MHz DIGITAL TELEPHONE • ANSWERING SYSTE
MEMO
ANNC.
MEMORY
MAIL BOX MULTI-USER DIGITAL ANSWERING SYSTEM
TAD-1010
MULTI-USER
DI GI TAL ANSWERING SYST EM
43-771.fm Page 10 Friday, August 13, 1999 2:59 PM