Radio Shack TAD-1010 - Manual (Page 21)

21
Storing a Pause in Memory
In some telephone systems, you must
dial an access code (
9 , for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number. However, you must
also store a pause after the access
code.
To insert a pause in a number you store
in memory, press
HOLD at the appropri-
ate point. This inserts a 1 1 /
2
-second
pause. For longer pauses, press HOLD
two or more times.
Dialing a Stored Number
1. Press TALK to get a dial tone.
2. Press MEM and the number key for
the memory location ( 0 - 9 ).
Chain Dialing Service
Numbers
You can make a call using more than
one of the TAD-1010’s memory loca-
tions. This is called chain dialing. Chain
dialing is useful for dialing special ser-
vices such as alternate long distance or
bank-by-phone.
When calling special services, dial the
service’s main number first. Then, at the
appropriate place in the call, press
MEM
and the number for the memory location
where the additional information is
stored.
43-771.fm Page 21 Friday, August 13, 1999 2:59 PM