Radio Shack TAD-1010 - Manual (Page 23)

23
SETTING THE DAY AND
TIME
1. Press and hold SETUP until the time
and flashing day icon appear.
2. Press REPEAT or SKIP to scroll to
the desired day.
3. Press STOP or wait 3 seconds to
exit the setup sequence. Or, press
SETUP again to set the hour. The
hour flashes.
4. Press REPEAT or SKIP to scroll to
the desired hour.
Note: AM and PM appear for AM
and PM hours.
5. Press STOP or wait 3 seconds to
exit the setup sequence. Or, press
SETUP again to set the minutes.
The minutes flash.
6. Press REPEAT or SKIP to scroll to
the desired minute.
7. Press STOP or wait 3 seconds to
exit the setup sequence. Or, press
SETUP again to set the mailbox
number.
SETTING THE NUMBER
OF MAILBOXES
The TAD is preset to record calls for a
single user; however, the mailbox fea-
ture allows you to set up to four sepa-
rate, private mailboxes in addition to the
generic message mailbox. Callers can
leave messages in mailboxes for spe-
cific individuals or departments or gen-
eral messages for everyone to hear.
Follow these steps to set the number of
mailboxes you want to use.
1. Press and hold SETUP until the
mailbox icon appears.
2. Press REPEAT or SKIP to select the
desired number of mailboxes.
Note: If no mailbox numbers
appear, the mailbox is set for the
generic mailbox.
3. Press STOP or wait 3 seconds to
exit the setup sequence.
REPEAT STOP PLAY SKIP
ON/OFF
MEMO
ANNC.
MEMORY
SETUP
VOLUME
MAIL BOX MULTI FUNCTION DISPLAY
ERASE
SUN
PM
SUN
MULTI-USER
DIGITAL ANSWERING SYSTEM
REPEAT STOP PLAY SKIP
ON/OFF
MEMO
ANNC.
MEMORY
SETUP
VOLUME
MAIL BOX MULTI FUNCTION DISPLAY
ERASE
MAILBOX
1
MULTI-USER
DIGITAL ANSWERING SYSTEM
43-771.fm Page 23 Friday, August 13, 1999 2:59 PM