Radio Shack PRO-89 - Manual (Page 44)

44
Removing a Lockout From a Frequency
1. Start a service bank or direct search.
2. Hold down L/O/L/O RVW for about 2 seconds. L-r
appears.
3. Repeatedly press ▲ or ▼ until the desired frequency
appears.
4. Press L/O/L/O RVW . The frequency disappears. If there is
another locked-out frequency, it appears instead. Or, if
there are no more locked-out frequencies,
L-r
000.0000 appears.
Removing Lockouts From All Frequencies
1. Hold down L/O/L/O RVW for about 2 seconds during a ser-
vice bank or direct search. L-r appears.
2. While holding down MON/CL , hold down L/O/L/O RVW . Flo
ALL-CL appears.
3. Press ENT . The scanner clears any lockouts from all fre-
quencies (except in the marine service bank). Or, if you do
not want to clear the lockouts, press
MON/CL .
Removing Lockouts From All Frequencies in All
Service Banks
Notes:
• These steps do not clear any lockouts in the marine ser-
vice bank.
• If you locked out frequencies within the range of any of the
service banks during a direct search, the scanner also
removes those locked-out frequencies when you use these
steps. For example, if you lock out 29.000 MHz during
direct search, the scanner removes it since 29.000 MHz is
one of the frequencies in the ham radio service bank.
1. Hold down L/O/L/O RVW for about 2 seconds during a ser-
vice bank or direct search. L-r appears.
2. While holding down MON/CL , press BAND . dEFAULt and
each of the service bands (except MRN ) appears.