Radio Shack PRO-89 - Manual (Page 43)

43
To remove the lockout from a channel, manually select that
channel again, then press
L/O/L/O RVW . L/O disappears.
Notes:
• Your scanner automatically locks out empty channels.
• You can still manually select locked-out channels.
Clearing All Lockouts from Channels
1. Press MAN . MAN appears.
2. While holding down MON/CL , press L/O RVW/L/O . Lo
ALL-CL appears.
3. Press ENT . The scanner clears all locked-out tags from
channels. Or, if you do not want to clear, press MON/CL .
Locking Out Frequencies
To lock out a frequency during a service bank or direct search,
press
L/O/L/O RVW when the scanner stops on that frequency.
The scanner locks out the frequency then continues searching.
You can lock out frequencies in both direct search and service
bank searches.
Note: You can lock out as many as 50 frequencies during a
search. If you try to lock out more,
FLo -FULL appears (see
“Reviewing Locked-Out Frequencies” and “Removing Lock-
outs From All Frequencies” on Page 44).
Reviewing Locked-Out Frequencies
To review the frequencies you locked out, hold down L/O/L/O
RVW for about 2 seconds during a search, then repeatedly
press ▲ or ▼ . The scanner beeps if there are no locked-out
frequencies, or L-r appears and the scanner displays all
locked out frequencies as you press ▲ or ▼ . When you reach
the highest locked-out frequency, the scanner beeps twice and
returns to the lowest locked-out frequency.