Rs-232 controller connection, Figure 3-12 . rs-232 control system connection, 12. rs-232 control system connection – Runco LIGHTSTYLE LS-3 User Manual
Page 45: Pre l iminar y
Runco LS-3/LS-5 Installation/Operation Manual
29
PRE
L
IMINAR
Y
RS-232 Controller
Connection
Connect a PC or home theater control/automation system (if present) to the RS-232 port
on the LS-3/LS-5; see Figure 3-12. Use a standard, 9-pin serial cable, wired
straight-through.
For more information about using this connection, refer to Serial Communications on
page 71.
Figure 3-12. RS-232 Control System Connection
1
2
3
4
5
7
8
9
6
to Automation/
Control System
or PC
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)
This manual is related to the following products: