Folded optics, Figure 3-6 . folded optics, Other considerations – Runco LIGHTSTYLE LS-3 User Manual
Page 37: 4 installing the optional cinewide lens mount, Installing the optional cinewide lens mount, 6. folded optics, Pre l iminar y
Runco LS-3/LS-5 Installation/Operation Manual
21
PRE
L
IMINAR
Y
Folded Optics
In rear-screen applications where space behind the projector is limited, a mirror may be
used to fold the optical path, as shown in Figure 3-6. The position of the projector and
mirror must be accurately set. If you are considering this type of installation, contact your
dealer for assistance.
Figure 3-6. Folded Optics
Other Considerations
Other considerations and tips that can help improve your installation:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector
away from heating and/or air conditioning vents. Changes in temperature may cause
drifts in the projector circuitry, which may affect performance.
Keep the projector away from devices that radiate electromagnetic energy such as motors
and transformers. Common sources of these include slide projectors, speakers, power
amplifiers and elevators.
3.4
Installing the Optional
CineWide Lens Mount
If you are installing a standard (non-CineWide) LS-3/LS-5, skip this step and proceed with
Mounting the LS-3/LS-5 (page 23).
If you are installing an LS-3/LS-5/CineWide, proceed with Installing the
Fixed CineWide Base Plate (page 22).
Screen
Mirror
1. Do not install the CineWide lens yet, only the fixed CineWide
base plate. You will install the CineWide lens after you install the
projector and adjust the primary lens.
2. Some components shipped with your projector may differ slightly
from what is shown in these instructions.
Note