Ricoh H5676 - Manual (Page 71)

Specifying a Destination Folder
63
2
F
Enter a user name used to log on to the NDS tree or NetWare server, and
then press {OK}.
If you select [NDS] for connection type, enter the user name, and then enter the
name of the context containing the user object. If the user name is “user” and
the name of the Context is “context”, the user name will be “user.context”.
G
If a password is specified for the log on user, enter it, and then press {OK}.
The Confirm Destination screen appears.
H
Press [Com.Test].
A connection test starts.
I
Check the text result, and then press [Exit].
J
Press {OK}.
Note
❒ If you change the protocol after entering the path name, user name, or pass-
word, a confirmation message appears.
❒ You can connect only to folders that you have the read privileges for.
❒ The connection test may take time.