Renesas Emulation Pod M306H2T-RPD-E - Manual (Page 43)

( 41 / 76 )
3.6 Connecting the PC4701
To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included
with this product package. Connect the PC4701 side connector of the FLX120-RPD to the cable
connector of the PC4701, then secure with screws the FLX120-RPD.
(1) Connecting the Cable to the PC4701
Figure 3.13 shows how to connect the PC4701 and FLX120-RPD
Figure 3.13 Connecting PC4701 and FLX120-RPD
CAUTION
Note on Connecting the Cable:
• To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side
connector horizontally with the "UPSIDE" facing up.
• Always shut OFF power before connecting the FLX120-RPD. The power ON state
could destroy internal circuits.
Note on Securing the Screws:
• After connecting the FLX120-RPD to the emulator main unit PC4701, be sure to
secure the screws mounted in both sides of the connector.