Ieee 802.11b (wireless lan) – Ricoh Aficio MP 161SPF User Manual
Page 32
Connecting the Machine
24
1
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.46 “Interface Settings”
p.53 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
User Tool
Setting Requirements
Interface Settings/Network Machine IPv4 Address
Necessary
Interface Settings/Network IPv4 Gateway Address
Necessary
Interface Settings/Network DNS Configuration
As required
Interface Settings/Network DDNS Configuration
As required
Interface Settings/Network Domain Name
As required
Interface Settings/Network WINS Configuration
As required
Interface Settings/Network Effective Protocol
Necessary
Interface Settings/Network LAN Type
Necessary
Interface Settings/Network Permit SNMPv3 Communictn.
As required
Interface Settings/Network Permit SSL/TLS Comm.
As required
Interface Settings/Network Host Name
As required
Interface Settings/
IEEE 802.11b
Communication Mode
Necessary
Interface Settings/
IEEE 802.11b
SSID Setting
As required
Interface Settings/
IEEE 802.11b
Channel
As required
Interface Settings/
IEEE 802.11b
Security Type
As required
Interface Settings/
IEEE 802.11b
Communication Speed
As required
File Transfer
Default User Name/PW(Send)
As required