Ricoh Aficio MP 161SPF - Manual (Page 19)

Connecting to the Interfaces
11
1
Connecting to the IEEE 1284 Interface
This section describes how to connect the IEEE 1284 interface cable to the IEEE
1284 interface board.
A
Make sure the main power switch on the machine is off.
If the main power switch is on, turn it off.
B
Turn off the main power switch of the host computer.
C
Connect the IEEE 1284 interface cable to the IEEE 1284 port.
D
Connect the other end of the cable into the interface connector on the host
computer.
Check the shape of the connector to the computer. Connect the cable firmly.
E
Turn on the main power switch of the machine.
F
Turn on the host computer.
When using Windows 95/98/Me/2000/XP and Windows Server 2003, a
printer driver installation screen might appear when the computer is turned
on. If this happens, click [Cancel] on the screen.
Note
❒ For details about installing the printer driver, see "Preparing the Machine",
Printer Reference.
Reference
"Turning On the Power" About This Machine
"Preparing the Machine", Printer Reference
A RH003S