Adding a new group – Raymarine Ray54E User Manual

Page 84

Text mode
Original mode

Ray54E VHF Radio

Adding a New Group
1. From the

DSC SETUP menu item described on page 71, rotate the CH knob

until the arrow points to

GROUP SETUP.

2. Press the

CH knob to accept. If an existing Group name and MMSI ID

number are already stored, those values appear. If blank, ,
, and are shown to indicate that the Group IDs
have not yet been programmed into the radio.

3. Rotate the

CH knob until the arrow points to the first available empty

group location.

4. Press the

CH knob to accept. The first field for you to enter data is the

GROUP NAME.

5. Use the

CH knob to modify the GROUP NAME field using the same tech-

nique described in Adding an Entry on page 59.