Raymarine Ray54E User Manual

Page 49

Text mode
Original mode

Chapter 5: Digital Selective Calling (DSC)

3. Push in the

CH knob to select GROUP. The Group Call menu appears,

which displays the Group entries you have saved.

Note: Only the Group IDs that have been programmed into memory ap-
pear in the list. If you have not yet programmed any groups into memory,
the message

NO GROUP IN MEMORY appears. See page 73 for instruc-

tions on entering Group ID numbers.

4. Rotate the

CH knob until the arrow points to the desired Group name.

5. Push the

CH knob to select the desired Group.

6. Rotate the

CH knob to select the working channel to be used for the Group

Call.

7. Push in the

CH knob to accept the selection.