12 using the monitor modes, Dual watch – Raymarine Ray54E User Manual

Page 37

Chapter 4: General Operations

4.12 Using the Monitor Modes

The Watch Modes monitor the programmed Priority Channel and other user-
selected channel(s). The watch is halted when activity is detected on a
monitored channel. The Ray54E is equipped with 2 types of monitor
operations: Dual Watch and Tri Watch.

Note: Monitor modes are disabled when the ATIS operation is active.

Dual Watch

Press and release the

DW/TRI key to activate the Dual Watch mode.

DUAL CH16 appears in the dot matrix display.

Dual Watch monitors the current working channel
and Channel 16 in cycle.

Dual Watch is demonstrated in the figure to the left;
the sample working channel is CH 72.

Press and release the

DW/TRI key to terminate Dual

Watch and return to the previous working channel.

Press and hold the

DW/TRI key to terminate Dual Watch mode and go into

Tri Watch mode.

Press and release the

CLEAR key to terminate Dual Watch mode and return

to the last-used channel.

Press and release the

16/PLUS key to terminate Dual Watch mode and

switch to the Priority Channel.

Note: During Dual Watch mode, the SCAN/SAVE, USER and CH keys are
inactive and sounds an error beep if pressed.