Using the microphone keys to make selections – Raymarine Ray54E User Manual
Page 68

58
Ray54E VHF Radio
➤
To make Menu selections:
1. Press and hold the
CALL/MENU key to enter Menu mode. The list of
available functions appear on the dot matrix display.
2. Rotate the
CH knob to scroll down the list until the arrow points to the
desired function. Push the
CH knob to accept.
To exit the Menu mode or sub-mode, press the
16/PLUS or CLEAR keys, or
else select the
EXIT option from the menu.
Using the Microphone Keys to Make Selections
The examples in this chapter describe how to make menu and character
selections using the
CH knob on the main unit. However, you can also
press the microphone UP/ DOWN keys to make selections and then
press the microphone
HI/LO key to accept.
See also other documents in the category Raymarine GPS receiver:
- RAYTHEON E32001 (13 pages)
- RAYCHART 420 (101 pages)
- L365 (83 pages)
- SR50 (48 pages)
- A65 (100 pages)
- RS12 (50 pages)
- DSM300 (82 pages)
- NMEA Multiplexer (16 pages)
- Pathfinder (111 pages)
- Pathfinder Radar (244 pages)
- autopilot control unit (111 pages)
- VolvoPenta IPS Autopilot System DPU (16 pages)
- autopilot + ST4000+ (145 pages)
- stand-alone master instrument (45 pages)
- ST80 (15 pages)
- Raystar 125 (8 pages)
- RS12 (38 pages)
- ST6001 (48 pages)
- Pathfinder Radar Scanners (66 pages)
- Chartplotter (101 pages)
- Heading Sensor (24 pages)
- Ray430 (54 pages)
- Viewable Marine Displays (38 pages)
- Marine GPS System (188 pages)
- C Series (244 pages)
- ST8001 (48 pages)
- hsb2 PLUS Series (246 pages)
- 631 PLUS (170 pages)
- navigation system (17 pages)
- ST8002 (48 pages)
- PowerPilot (18 pages)
- ST7002 (52 pages)
- GPS Kit (24 pages)
- 465 (107 pages)
- GPS Plotter (131 pages)
- GPS navigation (75 pages)
- ST7001 (48 pages)
- 300 (136 pages)
- Raystar 120 (30 pages)
- autopilot (137 pages)
- DSM30 (34 pages)
- Platinum Chart Card (29 pages)
- ST6002 (56 pages)
- 320 (139 pages)