7 radio setup, Band – Raymarine Ray54E User Manual
Page 79

Chapter 6: Menu Settings
69
6.7 Radio Setup
The Radio Setup menu item is used to determine four separate settings:
•
Frequency Band
•
Channel Name
•
Ring Volume
•
Key Beep
➤
To adjust these settings:
1. Press and hold the
CALL/MENU key to enter Menu mode.
2. Rotate the
CH knob to scroll down the list until the arrow points to RADIO
SETUP.
3. Push the
CH knob to accept. The Radio Setup screen appears.
Make your selection from the options on the list, described as follows.
Band
The Ray54E can transmit and receive all USA, International and Canadian
frequencies, if available. This setting determines which channel set is being
used. The appropriate indicator is illuminated in the LCD:
U for US, I for
International, or
C for Canadian channel sets.
See also other documents in the category Raymarine GPS receiver:
- RAYTHEON E32001 (13 pages)
- RAYCHART 420 (101 pages)
- L365 (83 pages)
- SR50 (48 pages)
- A65 (100 pages)
- RS12 (50 pages)
- DSM300 (82 pages)
- NMEA Multiplexer (16 pages)
- Pathfinder (111 pages)
- Pathfinder Radar (244 pages)
- autopilot control unit (111 pages)
- VolvoPenta IPS Autopilot System DPU (16 pages)
- autopilot + ST4000+ (145 pages)
- stand-alone master instrument (45 pages)
- ST80 (15 pages)
- Raystar 125 (8 pages)
- RS12 (38 pages)
- ST6001 (48 pages)
- Pathfinder Radar Scanners (66 pages)
- Chartplotter (101 pages)
- Heading Sensor (24 pages)
- Ray430 (54 pages)
- Viewable Marine Displays (38 pages)
- Marine GPS System (188 pages)
- C Series (244 pages)
- ST8001 (48 pages)
- hsb2 PLUS Series (246 pages)
- 631 PLUS (170 pages)
- navigation system (17 pages)
- ST8002 (48 pages)
- PowerPilot (18 pages)
- ST7002 (52 pages)
- GPS Kit (24 pages)
- 465 (107 pages)
- GPS Plotter (131 pages)
- GPS navigation (75 pages)
- ST7001 (48 pages)
- 300 (136 pages)
- Raystar 120 (30 pages)
- autopilot (137 pages)
- DSM30 (34 pages)
- Platinum Chart Card (29 pages)
- ST6002 (56 pages)
- 320 (139 pages)