Roland Digital Piano HP507 - Manual (Page 42)

& & Personalizing Your Piano Sound (Piano Designer)
What is Piano Designer?
The HP507 allows you to personalize your piano sound by
adjusting various factors that affect the sound, such as the piano’s
strings, the resonance produced using the pedals, and the sound
of the hammers striking the strings.
This function is called “Piano Designer.”
String
Resonance
Temperament
Hammer
Noise
Adjusting the
piano sound to
your taste
Making Detailed Adjustments to the Piano Sound
1
3 5 2
1.
While holding down the Piano [Grand] button, press the Piano [Early] button .
The Piano Designer screen will appear.
The “ConcertPiano” tone will be selected.
2.
Press the [ ] [ ] (Slow/Fast) buttons to select the item that you want to edit .
3.
Use the [–] [+] buttons to adjust the value .
4.
Repeat steps 2–3 to adjust the piano sound to your taste .
5.
When you’re finished using Piano Designer, press the Piano [Grand] button or the Piano
[Early] button .
Piano designer parameter
Parameter Value Description
Lid
0–6
(default: 4)
Adjusts the extent to which the lid of the grand piano is open.
The sound will become more mellow as you close the lid of the piano in the screen. The sound will become brighter as you
open the lid of the piano in the screen.
Damper
Resonance
Off, 1–10
(default: 5)
This adjusts the damper resonance of the acoustic piano sound (the sympathetic vibration produced in strings other than
those actually played when you press the damper pedal).
Higher settings will make the sympathetic vibration louder.
Hammer Noise
-2–0–2
(default: 0) This adjusts the sound produced when the hammer of an acoustic piano strikes the string.
Higher settings will produce a louder sound of the hammer striking the string.
Hammer
Response
Off, 1–10
(default: 2) This adjusts the time from when you play a key until the piano sound is heard.
Higher settings will produce slower response.
Duplex Scale
Off, 1–10
(default: 5) This adjusts the sympathetic vibrations of an acoustic piano’s Duplex Scale.
Higher settings will make the sympathetic vibration louder.
String
Resonance
Off, 1–10
(default: 5)
This adjusts the string resonance of the acoustic piano sound (the sympathetic vibrations of strings for previously played
notes that occur when you play another note).
Higher settings will make the sympathetic vibration louder.
Saving your settings
The HP507’s settings will revert to
the default values when you turn off
the power, but you can save them as
described in “Retaining the Settings Even
After Power-off (Memory Backup)” (p. 44).
42