Roland Digital Piano HP507 - Manual (Page 22)

Performing
Adjusting the Sound to Your Taste
The HP507 lets you add reverberation or modify the brightness of the sound.
Adding Reverberation to the Sound (Ambience)
You can add a pleasant reverberation to the sounds of the HP507, producing the impression that you are performing in a concert hall.
This effect is called “Ambience.”
2
1 3
1.
Press the [Ambience] button .
The [Ambience] button will light.
2.
While holding down the [Ambience] button, press the [–] [+] buttons .
The display will indicate the depth of the ambience effect values.
Screen Value Explanation
1–10
(default: 5)
Higher values apply deeper ambience.
3.
To turn off the ambience effect, press the [Ambience] button once again .
The [Ambience] button will go out.
* It’s not possible to specify the depth of ambience individually for each tone. The effect will be applied in the same way to each tone.
Saving your settings
The HP507’s settings will revert to
the default values when you turn off
the power, but you can save them as
described in “Retaining the Settings Even
After Power-off (Memory Backup)” (p. 44).
22