Renesas M3A-HS71 - Manual (Page 73)

Creating and Running a New Project Workspace
5.3.5 Setting Linker Options
Rev. 1.01 May 7, 2008 5-17
REJ11J0015-0101
5
(5) [Add section] dialog box shown below will be displayed. Enter “PCACHE” for “Section name” as shown in
Figure 5.3.13, and press “OK”.
The “CACHE” section is defined in the “cache.c” source file. The first character “P” indicates a P section.
Figure 5.3.13 Section Settings (5)
(6) The section name will be added, and it returns to [Section] dialog box. Confirm if the section has been set as
shown in Figure 5.3.14, and press “OK”.
It returns to the SuperH RISC engine Standard Toolchain dialog box, so press “OK” to finish your settings
Set in the
non-cacheable
area of CS0
Figure 5.3.14 Section Settings (6)