Renesas M3A-HS71 - Manual (Page 47)

Running the Software
4.1.2 SH7670 CPU board and E10A-USB Startup Procedure (HEW Startup)
Rev. 1.01 May 7, 2008 4-3
REJ11J0015-0101
4
(5) The [Open Workspace] dialog box shown below is displayed. In this dialog box, specify the directory indicated below.
"C:¥WorkSpace¥Sample_software¥SH7670_sample"
(6) After specifying the directory, select the file indicated below and click “Select”.
Figure 4.1.2 Open the Workspace Dialog Box
Note: For the first time only, a dialog box prompting you to confirm that the workspace directory has been moved will be
displayed. When this dialog box appears, click “Yes”.
(7) The [Select Emulator mode] dialog box shown below is displayed.
Select “Device:SH7670” and “E10A-USB Emulator” and click “OK”.
Figure 4.1.3 Select Emulator Mode Dialog Box