Renesas M3A-HS71 - Manual (Page 19)

Before Using the SH7670 CPU Board
1.2.1 Symbols Used
Rev. 1.01 May 7, 2008 1-3
REJ11J0015-0101
1
CAUTION
Regarding the reconstruction of this product:
•
Do not reconstruct this product. If the product has gotten out of order for reasons of disassembly
or reconstruction, requests for repair may not be accepted.
Regarding the handling of this product:
z Handle this product with caution, not to let it drop or fall down or apply strong mechanical shock.
z Do not touch the communication interface connector pins or other connector pins directly with
your hand. The internal circuit may be broken by static electricity.
z When moving this product to another place of installation, be careful not to apply strong vibration
or mechanical shock to it.
z After connecting each piece of equipment with cable, check the cables again to see that they are
connected correctly. For details on how to connect, refer to Chapter 2, “Setting Up the Hardware.”
z Before turning on the power for each connected piece of equipment, make sure you’ve finished
connecting all cables. Do not connect or disconnect any cable when the power is turned on.
Regarding the operating procedure for this product:
Note
•
Exceptional conditions or precautions are noted in an operation procedure or explanatory
description when it is necessary to call the user’s attention.
1.2.1 Symbols Used
Table 1.2.1 lists the symbols used in this manual.
Table 1.2.1 Symbol List
Symbol Meaning
[Menu->Menu Option]
The arrow “ Æ” indicates a menu option.
Example: File menu ÆSave As…
“File name”
“Directory”
“Button"
" … " indicates file names, directory, or button of dialog box.
Example :"C:¥Workspace¥Sample_softwawe¥ SH7670_sample "
"OK" button
"resetprg.c"