Renesas M3A-HS71 - Manual (Page 56)

Running the Software are
4.1.4 4.1.4 Sample Software Download Procedure Sample Software Download Procedure
Rev. 1.01 May 7, 2008 4-12
REJ11J0015-0101
4
(6) Running the program
To execute the program, select “Go” from the Debug menu (See Figure 4.1.19).
If the sample software is downloaded normally, LED7 on the SH7670 CPU board lights up and goes out alternately at
approximately one-second intervals.
Figure 4.1.19 Running the Program
Note: The contents of “resetprg.c" can be different according to the sample software version. If an error occurs or
unable to operate correctly or the software does not operate correctly, the hardware or software may not have
been set up correctly. Check the setup procedures in Chapters 2 and 3.