Ricoh Printer Reference User Manual

Page 60

Preparing the Machine

❖ When connected with the network

• The machine must support bidirectional communication.
• SmartDeviceMonitor for Client included on the CD-ROM must be in-

stalled, and TCP/IP must be used.

• Under Windows 2000, [Enable bidirectional support] must be selected, and

[Enable printer pooling]

must not be selected on the [Ports] tab with the RPCS

printer driver.

• In addition to the above, one of the following conditions must also be met:

• The SmartDeviceMonitor for Client port and the TCP/IP protocol must

be used.

• The standard TCP/IP port must be used without changing the default

port name (for Windows 2000 / XP and Windows Server 2003).

• Microsoft TCP/IP print IP address must be specified for use (for Win-

dows NT 4.0).

• IPP port name must include the IP address when using the IPP protocol.

❖ When connected with IEEE 1394

• The computer must support bidirectional communication.
• The machine must be connected to the IEEE 1394 connector of a computer

using the IEEE 1394 interface cable.

• [Activate] must be selected in the SCSI print of IEEE 1394 and [Activate] must

be selected in the Bidi-SCSI print.

• Under Windows 2000 / XP or Windows Server 2003, [Enable bidirectional

support]

must be selected, and [Enable printer pooling] must not be selected

on the [Ports] tab with RPCS printer driver.

❖ When connected with USB

The machine must be connected to the computer's USB port using the USB in-
terface cable.
The computer must support bidirectional communication.

Note

❒ Install SmartDeviceMonitor for Client from the supplied CD-ROM.