Settings that can be used with postscript 3 – Ricoh Printer Reference User Manual
Page 153
List of the Setting Items
145
6
Settings that can be used with PostScript 3
The following PostScript 3 settings can be used with the machine:
Note
❒ Depending on a type of printer drivers, different items may be displayed.
Settings
Selectable Items
Collate:
Off, On
Dithering:
Auto, Photographic, Text, User Setting
Duplex:
Off, Open to Left, Open to Top
Fit to Print Size:
Prompt User, Nearest Size and Scale, Nearest Size and Crop
Image Smoothing:
Off, On, Auto, Less than 90 ppi, Less than 150 ppi, Less than
200 ppi, Less than 300 ppi
Input Tray:
AutoSelect Tray, Bypass Tray, Tray 1, Tray 2, Tray 3, Tray 4
Output Tray:
Printer Default, Internal Tray 1, Internal Tray 2, Internal Shift
Tray, Finisher SR3000 Upper Tray, Finisher SR3010 Shift Tray,
Finisher SR3000 Shift Tray, Finisher SR3000 Booklet Tray, Fin-
isher SR790 Upper Tray, Finisher SR790 Shift Tray
Resolution
600 dpi
Size:
See General Setting Guide.
Staple:
Off, Top Left, Top Right, 2 at Left, 2 at Right, 2 at Top, 2 at Center
Toner Saving
On, Off
Type:
See General Setting Guide.
Paper Selection
Same Paper for All Pages, Different Paper for First Page, Use
Slip Sheet, Chaptering
Punch:
Off, 2 at Left, 2 at Right, 2 at Top, 3 at Left, 3 at Right, 3 at Top,
4 at Left, 4 at Right, 4 at Top