Ricoh Printer Reference - Manual (Page 157)

Specifications
149
7
Note
❒ You cannot plug devices together to create loops.
❒ Do not use cable that is more than 4.5 meters in length.
❖ Data transfer speed:
Maximum 400 Mbps
❖ Connectable number of devices on a bus:
Maximum 63
❖ Allowed cable hops on a bus:
Maximum 16
❖ Power supply:
Non external power supply
Cable Power repeated (IEEE 1394a-2000 compliant)
IEEE 1284 Interface Board Type A
❖ Transmission spec.:
IEEE 1284
❖ Required cable:
Standard IEEE 1284 compliant Micro Centronics 36 pin cable
IEEE 802.11b Interface Unit Type H
❖ Transmission spec.:
Based on IEEE 802.11b (wireless LAN)
❖ Protocol:
TCP/IP, IPX/SPX, AppleTalk
Note
❒ SmartDeviceMonitor and Web Image Monitor are supported.
❖ Data transfer speed:
Auto select from below speed
1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps
❖ Frequency range:
• Inch version:
2412 - 2462 MHz (1 - 11 channels)
• Metric version:
2412 - 2472 MHz (1 - 13 channels)