Renesas Compact Emulator M34571T2-CPE - Manual (Page 67)

M34571T2-CPE User’s Manual 5. Troubleshooting
REJ10J0972-0100 Rev.1.00 February 10, 2006 Page 65 of 72
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
http://www.renesas.com/en/tools
Figure 5.1 Flowchart to remedy the troubles
Turning on emulator
Upper panel LED
of emulator
See “5.2.(1)When the LEDs of the M34571T2-CPE Do Not
Display Normally” (page 66)
Init dialog box of emulator
debugger displayed (first)
1. Check the operating environment etc. of the emulator
debugger.
See the user’s manual of the emulator debugger.
2. Reinstall the emulator debugger.
Init dialog box of emulator
debugger displayed (second)
See “5.2.(2) Init Dialog Box Does Not Appear at Debugger
Startup” (page 66).
Emulator debugger startup completed
Normal
Normal
Normal
Not normal
Not normal/Error displayed
Not normal/Error displayed
Program window of
emulator debugger diplayed