Roland Studio Package Pro - Manual (Page 11)

Setting Up Studio Package Pro
11
■ Windows 2000
1. After installing the RPC-1 into a PCI slot, start up your computer.
2. The RPC-1 will automatically be detected, and the
“Found New Hardware Wizard” will start up. Click
“Next.”
3. Insert the included “Drivers/Update CD-ROM” into
your CD-ROM drive.
4. Choose “Search for a suitable driver for my device
(Recommended)” and click “Next.”
5. In “Optional search locations,” choose “CD-ROM
drives” and click “Next.”
6. A message will appear, indicating that the RPC-1
driver was found. Click “Next.”