RCA Scenium D61W136DB - Manual (Page 45)

Graphics contained within this publication are for representation only.
Chapter 6 43
Using the TV’s Menu System
Sound Menu
The Sound menu lets you adjust audio output. To access the Sound menu,
press MENU on the remote, and then select Sound from the main menu. The
following audio items can be adjusted: Sound settings, Sound type, Sound mode,
SAP, Sound Logic, Headphone settings, and Graphic equalizer.
Continues on next page...
Sound settings The Sound settings submenu contains the following items:
Left & Right balance Use the left or right arrow to center the bar under the
arrow to balance the left and right speakers.
Amplifier Use the left or right arrow button to select External (if your TV/
DVD is using external amplifier only) or Internal (if your TV/DVD is using
the speakers in the TV).
Subwoofer Set the TV’s subwoofer to External if the TV/DVD is using an
external subwoofer; or None.
Sound type Press the right arrow button to scroll through the available audio
types, which control the way the sound comes through your speakers. The
options available vary according to the input selected.
Mono (available for regular TV viewing only) Plays the sound in mono
only. Use this setting when receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into left and right channels.
Most TV programs and recorded materials have stereo audio. The word
Stereo appears in the channel banner when you tune to a program that is
broadcast in stereo.
Automatic (available for regular TV viewing only) Chooses the sound type
according to the current signal.
Left and Right (available for audio/video inputs only) Isolates either the
left or right channel of the incoming audio.
Sound Mode Press the right arrow button to scroll through the available audio
modes, which provides special processing through your speakers (depending on
the setting you chose as your Sound type).
Normal Does not give any special processing, simply provides the mono
or stereo sound provided by the signal you're watching.
Wide Available only for mono signals. “Widens” sound from mono
broadcasts and mono components connected to your TV/DVD for a fuller,
more spacious sound.
Magic Available only for stereo signals. Gives a surround effect with more
bass.
SRS TruSurround XT™ Available for stereo or multichannel input. Creates
a virtual surround sound effect through any two-speaker playback system.
SRS Dialog Clarity™ Available only when the Sound Mode is SRS
TruSurround XT. Makes dialog from the source material clearer when you're
watching it on your TV/DVD.