Tv/dvd + a/v receiver or speakers, Connections & setup, 12 chapter 1 – RCA Scenium D61W136DB User Manual
Page 14: Chapter 1 13, Connect to either fixed or variable output
Connections & Setup
12
Chapter 1
Graphics contained within this publication are for representation only.
Connections & Setup
Chapter 1
13
Graphics contained within this publication are for representation only.
�
�
��������
����
����
����
����
����������������
����������������
�
�
�
�
�
�����������
�����
���������
AUDIO/VIDEO OUTPUT
��������
�����
�������
�
�
�
����
�����
�����������������
���������
�
�
�
�
�
�
�
�����������
��������
��������
�
�
�
�
�
�
�
�
�
�
�
�
����
���
��������
������
������
������
��
��
���
������������
���
��
��
��
���
����
��
��
�
�
TV/DVD + A/V Receiver or Speakers
These are two different ways your TV/DVD uses a component to hear audio.
1. Connect audio cables to either the FIXED or VARIABLE AUDIO L and R OUTPUT jacks and
to the Audio Inputs on the A/V receiver.
• FIXED provides fixed-level audio output from the TV/DVD. This audio output is
ideal for connecting to an A/V receiver that has its own volume control.
• VARIABLE provides variable-level audio output. Volume levels can be controlled by
the volume controls on the TV/DVD's front panel and remote control.
-OR-
2. Use speaker wire to connect the TV/DVD to external speakers.
• The EXT/INT switch beside the jacks let you turn the TV/DVD’s internal speakers
on or off. If you connect external speakers, slide the switch to EXT so the audio is
sent to the external speakers only. Choosing INT sends the audio to the TV/DVD’s
speakers only.
Note: The external speaker rating is 8 ohms with 15 watts power handling capabilities.
1
2
Connect to either FIXED
or
VARIABLE Output