Accessories mi 51 – RayTek MI Miniature Infrared Sensor User Manual
Page 59
Accessories
MI
51
Figure 34: Mounting the Air Purge Jacket
1. Remove the sensor (1) and cable from the electronic box by
disconnecting the wires from the electronic box.
2. Open the Air Purging Jacket (3, 4)
and screw the white plastic
fitting (2)
onto the sensor up to the end of the threads, do not
over tighten!
3. Slip the cable (6)
through the backside (4)
of the jacket.
4. Close the Air Purging Jacket (3, 4)
and reconnect the wires to
the electronic box and apply the mounting nut (5).