Ricoh FAX1700L - Manual (Page 99)

Setting the Phone Line (Function 62)
1 Press Function and 6, enter the
access code 2, 2, 2, 2, then enter
62. You’ll get this:
INITIAL MODE Y/NEXTk
62 SELECT FUNCTION
2
Press Yes. Y/NEXTk
SELECT LINE
3 Press Yes again. SELECT LINE Y/jk
kTT PD
4
Press
j
&
k
to set your machine
for a tone dial line ( TT ) or a pulse
dial line ( PD ).
SELECT LINE Y/jk
TT kPD
5 Press Yes. PROGRAMMED will
flash on the display and you’ll get
this.
At this point, you could turn on
the Authorized Sender function
(page 37). We will skip this
Y/NEXTk
AUTHORIZED ON/OFF
6
Press Function. READY 100% 10:00
SET DOC OR DIAL NO.
INSTALLATION Initial Settings & Adjustments
90