Ricoh FAX1700L - Manual (Page 46)

Counters (Function 94)
These counters will help you if you wish to keep a regular check on how many pages your machine
has sent, received, and copied. The machine has the following counters:
TX Counter: The number of pages that your machine has sent (transmitted)
RX Counter: The number of pages that your machine has received
Scan Counter: The number of pages that your machine has scanned (including copies)
Print Counter: The number of pages that your machine has printed
(including copies,reports and lists.)
1
Press Function, 6 , and enter the
access code 2222, then press 9,
4, and Yes. TX :003256
RX :002648
2 Press Yes to check the SCAN
and PRINT counter. SCAN :003287
PRINT :002703
3
Either:
❐
To finish, press Yes twice.
❐
1) If you have replaced the photoconductor
before REPLACE OPC appears (see page
53) then press Yes to reset the counter. Y/CLEAR
OPC
2) Press Clear. Y/CLEAR
OPC
3) Press Yes.
4 When you have finished, press Function.
Rejecting Messages From Certain Senders
Rejecting Messages From Senders Who Don’t Identify Themselves
Your fax machine can reject incoming messages lacking an identifier signal. Follow the user
parameter procedure on page 64 to enter these settings.
Switch 05, bit 1 - 0: Accept such messages, 1: Reject such messages
Rejecting or Accepting Messages from Specified Senders
This feature is called Authorized Reception. It helps you reject junk fax mail.
It lets you specify which terminals you wish to receive fax messages from; all others will be shut
out.
Rejecting Messages From Certain Senders OTHER FEATURES
37