Ricoh FAX1700L - Manual (Page 14)

Memory Transmission
Caution: If your document gets stuck while it is being processed, press the
Stop key, and turn to page 55 for instructions on how to safely re-
move the original.
1
Make sure that the machine is in
standby mode for faxing. The dis-
play should look like this: READY 100% 10:00
SET DOC. OR DIAL NO.
2 Fan your document stack (at
most 30 pages: 80g/m
2
) to make
sure all pages are loose, then
square it.
All pages in your document must
be one-sided and be of the same
size.
3
Insert the document face up in
the feeder and adjust the guides
to fit the width of the document.
Note: You can dial before you set
the document. Place the docu-
ment after you dial the number
and go to step 7.
4 The display will look like this:
TRANSMIT OPTION k
DIAL FAX NUMBER
5
If the memory indicator is not lit,
press the Memory key.
Memory Transmission and Immediate Transmission FAXING
7