Ricoh FAX1700L - Manual (Page 71)

Displayed Error Messages
CHECK AUTO-DIALING You cannot use the auto-dialer at the moment. Use the ten-key
pad or the handset.
NO FILE EXISTS No polling reception operations have been programmed.
There are no messages in memory waiting for transmission.
Incorrect file number. Check the file number and try again.
TOO MANY DEST. The memory cannot hold any more telephone numbers.
Either: Delete some numbers then try again.
Or: Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried out, then try
again.
USED AS GROUP This Quick Dial Key has a Group stored in it.
USED AS DIAL This Quick Dial Key has a telephone number stored in it.
USED AS DIAL OPTION This Quick Dial Key is programmed as Dial Option Key.
USED AS GROUP KEY This Quick Dial Key is programmed as Group Key
NOT PROGRAMMED This Quick Dial Key or Speed Dial Code does not contain a
number.
ALREADY PROGRAMMED Either:This number is already included in this Group.
This RTI/CSI has already been stored for use with this feature.
PLEASE SET PAUSE You must add a pause after your area code when you input your
fax terminal’s own telephone number.
TONER LOW Toner has nearly run out. You can still make copies but must
change the cartridge soon.
ADD TONER The toner cartridge is empty. Install a new cartridge.
ADD PAPER The cassette is now empty.
CLEAR ORIGINAL A document is jammed in the feeder.
CLEAR COPY Paper is jammed in the printer.
CLOSE COVER A cover is not closed properly. Check that all covers are closed.
SERVICE CALL
©-©©
H Machine is out of order. Contact your service
representative. Be sure to write down the code numbers
and have it handy when you call for service.
j
CHECK PAPER SIZE The size of the installed paper does not match the
currently selected paper size.
Set the paper size (see page 82) or install the appropriate
paper.
Troubleshooting Displayed Error Messages
62