Settings required to use network twain scanner, Ethernet – Ricoh Aficio ISC 615G User Manual
Page 40
Connecting the Machine
32
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see “Interface Setting”.
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive]
.
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
Reference
p.54 “Interface Settings”
Menu
User Tool
Setting Requirements
Interface Setting/Network Machine IPv4 Address
Necessary
Interface Setting/Network IPv4 Gateway Address
As required
Interface Setting/Network DNS Configuration
As required
Interface Setting/Network DDNS Configuration
As required
Interface Setting/Network Domain
As required
Interface Setting/Network WINS Configuration
As required
Interface Setting/Network Effective Protocol
Necessary
Interface Setting/Network LAN Type
Necessary
Interface Setting/Network Ethernet Speed
As required
Interface Setting/Network Permit SNMPv3 Communictn.
As required
Interface Setting/Network Permit SSL/TLS Comm.
As required
Interface Setting/Network Host Name
As required