Ethernet – Ricoh Aficio ISC 615G User Manual
Page 37
Network Settings
29
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with ether-
net cable.
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive]
.
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
❒ If [Delivery Option] is set to [On], check that IPv4 Address is set.
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
Menu
User Tool
Setting Requirements
Interface Setting/Network Machine IPv4 Address
Necessary
Interface Setting/Network IPv4 Gateway Address
As required
Interface Setting/Network DNS Configuration
As required
Interface Setting/Network DDNS Configuration
As required
Interface Setting/Network Domain
As required
Interface Setting/Network WINS Configuration
As required
Interface Setting/Network Effective Protocol
Necessary
Interface Setting/Network Ethernet Speed
As required
Interface Setting/Network LAN Type
Necessary
Interface Setting/Network Permit SNMPv3 Communictn.
As required
Interface Setting/Network Permit SSL/TLS Comm.
As required
Interface Setting/Network Host Name
As required
File Transfer Setting
Delivery Option
As required
File Transfer Setting
Fax RX File Transmission
As required
File Transfer Setting
Scanner Resend Time
As required
File Transfer Setting
Scanner Resend Setting
As required