Roland Classic Organ C-200 - Manual (Page 30)

30
Additional Convenient Functionality
To save your own registration (PEDAL, MANUAL I,
MANUAL II), follow the instructions below.
1. Press the [Memory Piston].
The [Memory Piston] lights green.
2. Press the [Fortepiano/M1] or [Piano/M2] piston to select
the memory bank where you want to save your
registration.
The piston you activate lights green.
3. Press and hold the Harpsichord piston that corresponds
to the memory where you want to save your settings.
The Harpsichord piston corresponding to the selected
memory lights. The [Memory Piston] flashes for a few
seconds to indicate that the settings are being saved.
When it stops flashing, the operation is completed.
4. Press the [Memory Piston] (it goes dark) to leave this
mode.
Sometimes, switching off all active tilt tabs to completely change the organ registration may take too long. That is why the C-200
provides a “Cancel” function that switches off all tilt tabs simultaneously. (The “Cancel” function has no effect on the
[Coupler II/I] tilt tab.)
1. Press the [Memory Piston].
The [Memory Piston] lights green.
2. Press the [Celesta/0] piston.
All tilt tabs go dark, and the keyboard no longer
responds to your playing (this is the “CANCEL” func-
tion).
3. Press the [Memory Piston] again (it goes dark) to leave
this mode.
Saving your organ registration memories
Switching all tilt tabs off (CANCEL)
C-200_e.book Page 30 Monday, April 4, 2011 5:22 PM