Roland Classic Organ C-200 - Manual (Page 14)

14
Panel Descriptions
1. USB MEMORY port
This port is mainly intended for compact storage
devices, like a USB Flash memory (Roland M-UF-series).
You can use it to save the songs you recorded and to
play them back.
2. PK In socket
This is where you can connect an optional pedal key-
board unit (Roland PK-25A, PK-7A, etc.).
3. MIDI In/Out connectors
Use these when you want to transmit or receive MIDI
messages to or from an external MIDI device.
4. Pedal Sustain socket
You can connect an optional DP-series damper pedal to
this jack.
5. Pedal EXP socket
You can connect an optional expression pedal (Roland
EV-5, EV-7, etc.) to this socket.
6. Output R, L/Mono sockets
These sockets can be connected to an external amplifier,
mixer, audio recorder, etc.
7. DC IN socket
Connect the supplied AC adaptor (PSB-7U) here. See
also p. 16.
8. Ground terminal
See p. 16 for details about this terminal.
Rear panel
[1]
[2] [3]
[4] [5] [6] [7]
[8]
C-200_e.book Page 14 Monday, April 4, 2011 5:22 PM